Analysis of auto component manufacturers in India.

As we all know India made a very rapid growth after its independence in the field if automobiles as well. India was at the back foot in the 1950s but the companies worked hard with full dedication to take India to present position. So in this blog, I will tell you about some unknown truths about the auto component manufacturers in India.
According to the report, up to 2021 India is expected to export nearly 26 percent of the current market. Along with this, the automobile companies’ makeup to 7 percent of the total GDP of the country and offering an employment opportunity to 19 million people across the country. In the past 10 years, India increased the supply of components to other countries by three times. The turnover in the respective sector by India is expected to be 115 billion dollars by 2021.
On talking about the steel production, India beat Japan in 2016 and became the second most steel producer in the world. While hearing such achievements by the auto component manufacturers in India you can know its importance for the growth of the country as its produce plays an important role in increasing the GDP and other such terms.
Thus, auto component manufacturers in India plays a vital role in the GDP of the country.
http://www.avtec.in

Which is best automatic or manual transmission.

The transmission is an important component in the vehicle and helps in supplying power from engine to the axle in an efficient way. So the transmission components important for internal working of the engine. Now here comes a question, which transmission is more effective- manual or automatic?

It’s not easy to answer this question but I will try to provide an answer to the point. Both of them have unique advantages in a different situation, one is good in some condition while the other may be at a lower level for the same task.

The automatic transmission is continuously beating its old brother manual transmission components and still preferred in the automated industry. It has some advantages like easy to use, less manual restrictions, preferred in hilly regions and decreased risk of stalling.

Apart from this the manual transmission too has advantages over automatic in other fields. The manual transmission is less expensive, better fuel efficiency, cheaper to maintain, less risk of getting stolen and provides better control than an automatic transmission.

So, on considering the above points the automatic transmission components is carrying more weight than a less costly manual transmission. It is simple and easy to control for a new person without much effort. 

http://www.avtec.in/avtec-engine-transmission-components.php

Overview of the parts of the engine.

Nowadays automobiles have some importance in everyone’s life. But do you know how the engine converts the fuel energy into mechanical one or what are the major parts that help the vehicle in performing this task? Below is the short explanation of this question.

The engine parts manufacturer produces these parts with high accuracy in order to provide optimum results. The major parts of the engine are intake and exhaust valve, piston, cylinder, crank rod and the connecting shaft.

The fuel is supplied to the engine through the intake valve and the waste material is exhausted from the exhaust valve. The piston helps the vehicle by compressing the fuel-air mixture in petrol engine and only fuel in a diesel engine. The cylinder helps in guiding piston and compressing fuel inside it. The connecting rod helps in converting the reciprocating motion of the piston to the rotary one through the crank. Apart from this there is one other important part also, named as a flywheel. It stored the energy in it and provide it to the engine when required.

The above-explained are the major parts of the engine parts manufacturer that helps it in converting fuel energy into mechanical one with optimum efficiency. 

http://www.avtec.in

The torque providing parts in automobiles.

All of you like automobiles and feels happier while riding but do you know the how the power is managed by the vehicle. Here is the explanation and I bet most of you don’t know about it.

The power generating part of the vehicle is its engine. It supplies all the power required to derive the vehicle. But do you know that the energy supplied by the engine is at 3000 rpm which is too high and need to be reduced before supplying it to the wheels?

The transmission gears and shafts are the key elements in the transmission system which helps in reducing the speed of rotation along with an increase in torque. The transmission gears help in reducing gear ratio through the variation in gear size and helps the vehicle to achieve high initial acceleration. The gears used to perform such action are mainly helical or spur gears.

The transmission gears and shafts is a long circular rod containing universal joints to supply energy from the gearbox to differential located at some angle. The availability of the universal joint helps in supplying power at different angles. Thus, the whole assembly helps in reducing rpm generated by the engine and increasing torque for better starting speed. 

http://www.avtec.in/avtec-engine-transmission-components.php

Transmission gears and shafts- the key parts of the transmission.

It’s very important for an automobile manufacturer to keep an eye on the transmission system of the vehicle in order to provide effective power transfer to the wheels. The transmission gears and shafts help in supplying power to the wheels though smooth and efficient working.

The transmission gears and shafts are used to produce variation in gear ratio through the application of different sized gears having the same module. The reduction of gear ratio is important as it helps in reducing the high rotational speed produced by the engine. Along with this the transmission shafts also plays a vital role in transferring power at some distance.

Generally, the gears used for such work contains round gears or ring gears. The round gears are either spur or helical and exist with a module ranging from 1-7. The finishing is supplied to the gears through shaping, shaving, and grinding. The ring gears exist with a module 1.5-7 and are used as transmission gears. The transmission shaft is made up of the case hardening steel or through hardening steel along with a length varying from 50-600 mm depending upon the requirement.

Thus, transmission gears and shafts are the key parts for the working of an automotive. 

http://www.avtec.in/avtec-engine-transmission-components.php

All about gears and shafts used in the vehicle.

Gears and shafts are the important components available in the vehicle for its internal working. Starting from the gearbox to the differential gears are available everywhere and plays a vital role in transferring effective power from the engine to the wheels. Not only the gears the shafts are also available like a transmission shaft which helps in transferring power from the gearbox to the differential and contains universal joints too.

The gears available in the gearbox helps in converting speed and torque generated by the engine. The small size gears help in increasing the torque by decreasing the rotational speed supplied by the engine. Whereas the largely sized gears help in increasing speed rather than torque. Thus the gears are adjusted in a systematic manner and are meshed as per the requirements. The gears are available in the differential too that helps in providing average torque while taking a turn.

The transmission shafts also play a vital role in supplying power to the wheels. The shaft is equipped with some universal joints which help in supplying rotational energy at different angles.

Thus, gears and shafts are the key components used in the vehicles and occupy a great importance for its effective working.

http://www.avtec.in/avtec-engine-transmission-components.php

About Auto components manufacturers in India

India is one of the dominating countries in the branch of automobiles. The ongoing growth in the field of this industry took India to another level of automation. At present India is moving towards the 4th largest auto component manufacturers in India.

Currently, India is preferred as a vendor company for the highly rated l companies across the world in term of auto components. The key factor behind it is the production of the auto components at very low cost as compared with other suppliers and this is possible due to the availability of cheap labor in India.

Mostly the leading automotive companies are dealing with the Indian companies for the auto components at effective cost. The auto component manufacturers in India getting into the list of top 100 companies globally are- Motherson Sumi System, Bharat Forge, Sundram Fasteners,  Sundaram Clayton and both India. Some other Auto component manufacturers in India are great, Dunlop, excide, Bharat Seats, AVTEC, group, Lucas TVS, Anand, MIL, Sona Koyo Steering systems Limited etc.

Thus, from the above explanation, you may understand the accelerating automotive companies in India and all this because of their high-quality service at a very less cost when compared with other suppliers
http://www.avtec.in

All you need to know about transmission of a vehicle

Nowadays the automotive companies are focusing more on automatic transmission components rather than manual. Most of the upcoming cars are based on automatic transmission. What are the different types of transmission available on the market?

Currently, there are three types of transmission available in the automotive industry and named as automatic transmission, semi-automatic transmission, and manual transmission. The work of these transmissions is similar to their names.

On talking about the transmission components, it includes all those parts which provide controlled the application of the power. In other words, it can also be termed as the gearbox.

A transmission helps in reducing the speed of the output shaft than the input shaft. Thus gains some mechanical advantage which in turn results in increased torque. It provides the output speed at a different range and the whole process is done with the help of gears.

In automatic vehicles, the major transmission components are torque converter, hydraulic system, and planetary gear train. These components help the vehicle in providing effective use of power as per requirement.

Thus transmission components are important from vehicles point of view as it helps in decreasing rpm generated by the engine along with an increase in torque for the running of a vehicle. 

http://www.avtec.in/avtec-engine-transmission-components.php

Engine- the power generator in the vehicle.

As we all know that the engine is the power source of an automobile. The power required for the displacement of the vehicle comes from the engine only. In hybrid vehicles, there is some other power source also which acts as a secondary power source.

In simple words, an engine is a machine that converts the fuel energy into mechanical one through combustion. The engine parts manufacturer provides the parts within the designed limit in order to obtain optimum efficiency.

The engine used in the automobile is internal combustion engine. So the fuel entering the engine is burned and the energy produced is converted into mechanical work. The lightweight vehicles contain a petrol four stroke engine working on the principle of an auto cycle while the diesel engine is used in heavy load vehicles like trucks and buses because of their effectiveness in the respective field.

The energy produced in the engine can’t be fully converted into mechanical one, so the engine parts manufacturer are trying to improve the performance of the engine as much as possible. Due to their hard work in the same field, they are continuously improving the efficiency of the engine.

So the engine is the main power supplier and needs to provide optimum performance.

http://www.avtec.in

Automotive Transmission components: Gears and Shafts

A transmission means gears working together. Main components for transmission:gears and shafts .A Gear or cogwheel means a rotating machine part which has cut teeth or cogs which meshes with another similar part to transmit power. There are two types of gears are external and internal. External gears have teeth on the outer surface. Internal gears have teeth on the inner surface. The other types of gears are Spur gear, Helical gear, Double helical gear, Bevel gear, Spiral bevels gear, Hypoid gear, Crown gear, Worm gear, etc. Rotating machine element which transmits power from one part to another part is called shaft. Usually, gears are mounted on it. There are two types of shafts Transmission shafts and Machine shafts. Transmission gears and shafts are the key components because of which we are driving our cars today.

Types of Transmission

There are two types of Transmission

Automatic Transmission: In Automatic Transmission, the cars change the gears automatically.

Manual Transmission: In Manual Transmission the driver changes the gears using the clutch. 

http://www.avtec.in/avtec-engine-transmission-components.php