About Auto components manufacturers in India

India is one of the dominating countries in the branch of automobiles. The ongoing growth in the field of this industry took India to another level of automation. At present India is moving towards the 4th largest auto components manufacturer.

Currently, India is preferred as a vendor company for the highly rated l companies across the world in term of auto components. The key factor behind it is the production of the auto components at very low cost as compared with other suppliers and this is possible due to the availability of cheap labor in India.

Mostly the leading automotive companies are dealing with the Indian companies for the auto components at effective cost. The auto component manufacturers in India getting into the list of top 100 companies globally are- Motherson Sumi System, Bharat Forge, Sundram Fasteners,  Sundaram Clayton and both India. Some other Auto component manufacturers in India are great, Dunlop, excide, Bharat Seats, AVTEC, group, Lucas TVS, Anand, MIL, Sona Koyo Steering systems Limited etc.

Thus, from the above explanation, you may understand the accelerating automotive companies in India and all this because of their high-quality service at a very less cost when compared with other suppliers.

http://www.avtec.in

The various transmission parts manufactured by the company.

Transmission is that part of the vehicle which is connected to the output of the vehicle and provides the power to the wheels for continuous spinning.

We are the transmission parts manufacturer and provides round gears, ring gears, planetary carrier assembly, flywheel, and housings. 

The gears provided by the company includes round and ring gears. These gears can be helical or spur and are available in a wide range of diameters from 30 to 630 mm.

The shafts manufactured by the company includes cluster gear shaft and synchro cones shaft. These shafts are available with a length starting from 50 to 600 mm depending upon the requirements.

The flywheel is provided with a turning capacity of 1000 mm and is made up of ductile iron, cast iron, and forged steel. The flywheel is used to store energy and supplies the same when required. The planetary carrier assembly consists of a sun gear surrounded by smaller or planetary gears. These are connected with the help of outer ring gear. The whole assembly came with a diameter ranging from 100 to 500 mm and are available in a single and double deck, integral and split.

All these are the components provided by the company.transmission parts manufacturer

http://www.avtec.in

Overview of the automotive industry in india

In auto component industry, India has a high-level competition because of the presence of global as well as Indian auto component companies. On talking about the size of the industry, India cover around 34.7 billion US dollars along with an approximate growth of 26 percent per annum since 2005. As the industry occupied a slow growth in the session 2008-09 due to the depreciation in the global market, auto component manufacturers in India are ready to take such challenges.

In the past few years, auto component manufacturers in India had increased their grip in the global market. Along with this, a parallel growth in the export market also occurred and reached 17 percent per annum in the previous six years. Some high thinkers from auto component manufacturers in India are working according to the global companies by focusing on the terms like TQM, 6 sigmas, TPM etc. and are achieving quality certificates for their dedicated work.

The key reason behind the success of Indian auto component manufacturer in the presence of highly skilled and high-quality service providers at a cheaper cost but still India is having only one percent share at the global level in the respective industry. 

http://www.avtec.in

Services provided by professional of automobile companies

With the increase in the technology, the growth of the automobile companies increases respectively. In these days, the motor vehicle become the necessity of the people to go out because it make the journey easy and take less time to go anywhere.

What are functions of the automobile industries?

·         The engineers and the designers in this field have many years of experience and they tries to make continuous improvement for the comfort and convenience of the customers. The use of Powertrain components in the vehicles helps to generate power and convert stored energy into kinetic energy which improves the efficiency of the vehicles.

·         Such industries have many new technology Transmission gears and shafts which are used to control the speed of the running vehicle and elevate the design of the luxuries vehicles.

·         The companies have professional engineers who are responsible for the safe and effective production of the vehicle and to maintain the cost of the operation, so that people can get the high quality vehicle at affordable prices.

Companies spend decades on enhancing the quality of the services they provide through their products. Different types of vehicles are available in the market according to the budget of the peoples and they have different qualities. 

http://www.avtec.in/avtec-engine-transmission-components.php

Years of the experience of the automobile industries

Over the years, many companies started their business in manufacturing the motor vehicles. The need of vehicles growing per day and reason behind this is the comfort and convenience provided by them. Several process and components are used for the completion of any vehicle for its effective running.

What are the different advantages of components in any vehicle?

·         Transmission gears and shafts elevate the design and look of the motor vehicles and control the speed of the running. This will provide comfort and safety to peoples.

·         The engineers of the automobile industries use Powertrain components to generate power which help the engine to work effectively. The components of such type are used to transform the stored energy into kinetic energy.

·         Many other components are used to reduce the weight and the cost of the automobiles which helps in manufacturing a quality product for customers.

In the present day the attention of the people is toward the quality of vehicle which they get in affordable prices. Many automobile companies have specialization in making luxuries vehicle and they also make unique vehicle on the demand of the customers. The companies have professional engineers and designers who have years of experience in making the vehicles and they are trying to make continuous innovation in this field. 

http://www.avtec.in/avtec-engine-transmission-components.php

Do you know why gears are designed in a different order?

As most of you are capable to drive a four-wheeler and you are fitted with the habit of changing gears and shafts as per the design. But did you ever thought why the designers did that in such manner and why the gears are not supplied in a sequence? The key reason for such thing is the arrangement of gears.

The gears and shafts make it impossible for an automobile to supply power at required speed and torque.

So on considering the gears located in the gearbox, they are mounted on the main and secondary shafts. The gears are sequenced in either increasing or decreasing the size and are equipped to provide a specific amount of torque and speed to the wheels. Depending upon the type of gearbox used the gears can either be in constant mesh or can be shifted to engage them.

 The power from the engine shaft is supplied to the main shaft have a number of gears on it. The shaft is shifted with the help of gear handle in order to mesh it with required gear and provide power to the output shaft.

So the gears and shafts are necessary to perform any task in the vehicle. 

http://www.avtec.in/avtec-automotive-engines-and-transmissions.php

The common problems generated in the engine.

Some of the engine parts manufacturer problems are unavoidable and need to be under proper care. As the proper maintenance will reduce the chances of failure but it’s not sure that the car won’t break down. As the distance covered by the car increases, its probability of failure also increases. Sometimes the reason may be simple like a loose gas cap or dirty air filter.

The engine parts manufacturer perform their work by keeping in mind all the failure conditions while designing them. This helps in achieving a long working life of an engine. Some common engine problems are stated below:

The most suffered issue is it's no start condition. If there exists a clicking but the engine didn’t work then it shows the battery issue. Apart from this, if the engine cranks but does not work then the problem is in its fuel or ignition system.

Some of you are suffered from the overheating problem in your vehicle. This is mainly due to less coolant available. It may be due to the leakage also.

A ‘service engine soon light’ is provided to show any fault generated by the sensors connected to the engine parts manufacturer, emission or powertrain controls.

These are some common problems generated in the engine.

http://www.avtec.in

Upcoming expansions and investments in the field of automobiles.

There are various auto component manufacturers in India which achieved a large growth in the previous few decades. India is situated very near to the major automotive markets like Europe. So most of the dominating companies are trying double sore work by manufacturing few components themselves and other by the use of Indian facilities. The major transformation going to happen in this field are as follows:

Globally known adient is aiming to start India's biggest plant for testing and prototyping facility of automobiles in June in the current year.

Spark Malinda known for its auto components had started a technical center which will work on new innovations and take the company toward electrified solutions.

Fras-le from Brazil and ASK automotive came together to set up a plant for the production of linings and brake pads in Haryana for commercial vehicles. The investment for the work is nearly 15.6 million dollars.

Canadian auto component manufacturer- Magna international is also planning to add three new plants in India by 2019.

The German industrial and automotive parts maker with Indian arms named Schaeffer India is trying to invest 300 crore rupees in the session 2018-19.

Thus, we can say that India is going to achieve new peaks in the upcoming years in this sector.

http://www.avtec.in/

Why is single gear transmission used in electric cars?

The transmission components are essential for the internal working if an engine. But do you know why electric vehicles are equipped with a single gear transmission? Here’s your answer.

Mostly electric cars come with single speed transmission while the counterpart has a gearbox with multiple speed ratio. As we all know that the electric motor delivers maximum torque at zero rotation per minute. So it doesn’t need a special component to disengage it from the drive train in order to achieve ideal condition.

Unlike an internal combustion engine, electric motors have a wide range of rpm and are capable to provide its optimum power output at this range. So there is no need to provide a variety of gears to keep the engine in its effective zone. Thus the electric car designers pic an optimum gear ratio that will supply a balance between its top speed and acceleration. The electric motors are capable to attain an rpm of 20,000, so the top speed can’t be constrained.

In short, electric motors are capable to offer a wide range of speed which an internal combustion cannot achieve. This makes it possible for an electric car to provide required results with a single transmission and reduces transmission components for the vehicle. 

http://www.avtec.in/avtec-engine-transmission-components.php

The transmission of a motor vehicle.

The transmission parts manufacturers includes all those parts which take the power from the engine and supplies it to the wheels. So the transmission parts are clutch, gearbox, differential and the drive shaft.

The arrangement of the transmission varies depending upon the drive of the vehicle. The transmission uses the energy created by the engine and supplies it to the wheels in order to make continuous spinning. The transmission parts manufacturersproduce planetary gears, torque converter and hydraulic system for its working.

While getting the deeper knowledge of the transmission you will definitely hear about the planetary gears. These gears are assembled to work in a systematic manner and provide a required rpm ratio.

In the transmission, there is a hydraulic system too which helps the vehicle in changing gears, cooling the whole system and lubricating parts.

Along with these parts, the components of the transmission includes torque converter too. It is located in the place of clutch in vehicles having automatic transmission. It helps the vehicle in running even when you stopped.

These three are the major points you must know to understand the basic working of transmission parts manufacturers. Not only this you may ask your serviceman for more knowledge on the same topic. 

http://www.avtec.in