Saturday 2 July 2016

Transmission Components



Vehicle drive wheel changes speed by transmission

It’s no secret that cars with manual transmission are usually more fun to drive that their automatic equipped counterparts. If you have seen even a passing interest in the act of driving, then the chances have you also appreciated a fine-shifting manual gearbox? From the four-speed basic handbook in a car from the 60’s to the highest Tec six speed in the car of today the principles of a manual gearbox are the same. The driver must shift gear to gear. Normally a manual transmission component bolts to a clutch house in that bolts to the back of the engine. If the vehicle is a front wheel, drive the transmission still attaches to the engine in the similar fashion. 



This is for the reason as the transmission, differential and drive axles are one regarded as one complete unit. In a four wheel drive car, it has also supplied as a part of the front axle for the frontage wheels. The function of any transmission is transferring engine influence to the drive shaft and also to rear wheels. Gears inside the transmission component change the vehicles, drive-wheel momentum and torque to relation to engines momentum and torque. Low gear ratio serves as torque multipliers and helps the engine to develop sufficient power to speed up from a standstill.

Torque and power from the engine come to the front of the transmission componentand rotates the main drive gear, which meshes with the cluster or countershaft gear. A series of gear, forged into one piece that resembles a cluster of gears. The cluster gear assembly rotates anytime the clutch is engaged to the engine which is in running mode, whether or not the transmission is in gear or it is in neutral. In order to mesh the gears and apply the engine power to move the vehicle, the driver presses the clutch and moves the shifter, which in turn moves the shift linkage and fork to slide a gear along the main shaft. Once the gears are meshed the clutch is released and the engine power is sent to the drive wheels. There can be several gears of different diameters and tooth count, and they all rotate at different speeds.

Friday 24 June 2016

How Gears and Shafts enhance efficiency of machines?



Gears form main part of vehicle, motor or any other machine. There are many manufacturing companies, but not all will deliver you the same level of satisfaction. Invest proper time in selecting your preferred manufacturing company. The life of gears used depends on the quality of raw materials used by the company. It is always better to be informed about facts of all the companies who do not use similar type of raw materials for meeting the needs of clients. Only a few companies are committed to quality while others don't even care. Avtecgears and shafts specialize in manufacturing individual machine parts and assembling them.



Gears have wide applicability and it includes agriculture, railway, and defense, automobile and manufacturing segments. The products offered by the gear manufacturers include gear, sockets, and gearboxes, shafts, assembling parts of machine, pumps and pinions. They generally offer you all the products that you may be hunting for. If you need Avtec gear and shafts, you require not keep running starting with one place then onto the next looking for quality materials. They concentrate on meeting both residential and universal prerequisites of vehicles riggings and gearboxes.

Gears are mechanical elements that transmit rotational motion by successively engaging teeth. It is used for changing speed, power or direction of input between input and output shaft. The gears are classified into three categories according to axes of rotation. Common gears under parallel shafts include:

  • ·         Spur gears

  • ·         Parallel helical gears

  • ·         Herringbone gears

  • ·         Rack and pinion gears

  • ·         Crossed helical gears

  • ·         Hypoid gears

The parts of shafts include:

  • ·         Spline shafts

  • ·         Defense axle shafts

  • ·         Axle shafts
 
Before choosing any manufacturer for your product, make sure to check the certification achieved by them. The certification reflects that the company takes proper care and keeps standard in view for manufacturing the products. It also guarantees a quality to some extent.
 

Check their sites and look for their products, clients and manufacturing process undertaken by them. You may also ask your friends to suggest you some reliable manufacturers. The rising number of automobile industries affects the requirement of gears directly.

Tuesday 24 May 2016

Gears and Shafts



How do couplings transmit power with gears and shafts?

Coupling is a device that is used for connecting two shafts to transmit power. For joining them, some degree of misalignment is required. Proper maintenance and installation of couplings can help you to save a substantial amount and reduce cost and downtime. Gears are large, have high torque density and limited cross section of yoke and cross. Proper installation of gear and shafts can avoid misalignment over a passage of time. Bearings wear down and change its dimension with change in temperature.



The misalignment takes place due to vibrations. There are different types of gears available in the market and it is manufactured according to material, shafts, size and purpose. There are different criteria according to which gears are classified. One common way is the arrangement of gear and shafts. There are three kinds of arrangement of shafts. They are: 


  • ·         Parallel shafts

Parallel shafts interlock in the same surface level. They function in such a way that they transfer power of rotational motion between the parallel shafts.  It is efficient enough to provide maximum horsepower and is efficient for long term. It is capable of carrying high load but is little expensive. 


  • ·         Intersecting shafts

Intersecting shafts allow smooth transfer of power and motion between the axes. The power machines need speed and strength to handle high load capacity. It is generally used to power hand drills, locomotives, marine applications, etc. 


  • ·         Non intersecting or Non parallel axis

These are used on applications that need high ratio speed reduction to provide transmission in a limited area. Also, it has limited load carrying capacity. 

A gear is cylindrical toothed wheel used to transmit rotational motion from one part of the machine to the other. Flexible gear coupling are available in two configurations- full gear and half geared half-rigid. Full-geared couplings have capability to accommodate both offset and angular misalignment while the half-geared half-rigid coupling has single rigid hub to take care of angular misalignment. When two or more gears work together, the connection between the gears allows flow of power from one gear shaft or axle to the other. Therefore, both gears and shafts are dependent on each other.

Monday 9 May 2016

Engine Parts Manufacturer



Find the best Engine Parts in your city

To lift your truck smoothly all the time, you may need right forklift engine parts. You may need things like replacement engines or things like belts or exhaust clamps and pipes. The brand of your truck does not matter, and you just need some basic things for getting the right part for your vehicle. Your truck can be either electric forklift or an internal combustion forklift. Determine if an IC forklift is powered by diesel, gasoline or propane. Different types have different forklift engine parts, and it establishes the right type and saves a lot of time. Another thing that you should determine is a model of the lift truck.



Engineparts manufacturer, manufacture parts like the cylindrical head kit and ring gears and these differ from brand to brand as they are designed for specific engines. The model of forklift makes a difference in choice of parts. The manufacturers are working on making changes in the engine of the truck to make them more efficient. It is important to determine the model of truck and help in catering to the needs of specific parts. After identifying the make and model of truck, you need to know its part number. Each part of the truck has its unique identification number in the inventory system. 

The part number is manual, and it comes with your forklift. A good lift repairperson can determine the engine part you require. After you know the part you need, decide on what parts, you want. Aftermarket or reconditioned engine parts are an attractive alternative as they outperform the original version. An affordable price level and reconditioned parts may serve the purpose like a flywheel assembling and radiators. Your truck may need replacement from time to time. For a good turnaround, you need to contact a good supplier of forklift engine parts. 

Domestic manufacturing units have reduced dramatically. Most products used by people are no longer made domestically. High performance engines need special components that are not available at automotive dealers. It is important to build high performance engines as it takes some time for receiving. Customers should realize their savings from automotive parts and the consequences go beyond savings. Besides availability, http://avtec.in also caters quality issue.

Tuesday 19 May 2015

Gears and shafts Manufacturers - Avtec

Avtec is a leading gears and shafts manufacturers company in India, TS 16949 and QS 14001 certified facilities high quality engine parts, gears & shafts, engine transmission, transmission components rolled shafts, spur gear, bevel gears, powertrain components etc.


About Avtec

AVTEC is one of the largest independent manufacturers of powertrain and precision-engineered products in India. It is a part of CK Birla Group – a leading global business house, with over 20,000 employees and a combined turnover of USD 1.6 billion.


The company serves some of the best-known domestic and global automotive and off-highway companies, including global OEMs such as Allison, BEML, Caterpillar, Daimler, Ford, General Motors, Renault-Nissan, Tata-Jaguar and several other established brands.

Call or E-Mail your Gears and Shafts
request for quote today !


Tel: +91 11 4209 2100
Fax: +91 11 4209 2199
Email: corporate@avtec.in